Ross Synergy 100, Installation Manual, Page: 124 / 246

7–24 • Communication Setup Synergy 100 Installation Guide (v16.10-S100)
3. Press
2. Groups
to display the Audio Groups Menu .
Audio Groups Menu
4. Select an Audio Group to set up as follows:
• Press 0. Group .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the Audio
Group number ( Group 1 – Group 6 ) that you want to set up.
• Press the right SEL button to accept the new settings.
5. Assign an audio channel to the selected Audio Group as follows:
• Press 1. Channel 1 .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select an audio
channel that you want to include in this group. You can selected between Chan 1 –
Chan 16 or None .
• Press the right SEL button to accept the new settings.
6. Assign a second audio channel to the selected Audio Group as follows:
• Press 2. Channel 2 .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select a second
audio channel to include in this group. You can selected between Chan 1 – Chan
16 or None .
• Press the right SEL button to accept the new settings.
7. Press MENU to display the Installation Change Screen .
8. Accept or cancel these changes as follows:
• Press 0. Confirm to accept the changes.
• Press 1. Cancel to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure to assign audio channels to an Audio Group.
Operating
Tip
You can assign a third audio channel to the selected Audio Group by
assigning it to
3. Channel 3 .
Groups
0. Group
1. Channel 1 Group 1
NONE
2. Channel 2
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up
Chan 15
3. Channel 3 Chan 9