Ross Synergy 100, Installation Manual, Page: 150 / 246

8–16 • Additional Installation Setups Synergy 100 Installation Guide (v16.10-S100)
3. Press
MENU
to display the Installation Change Screen .
4. Accept or cancel these changes as follows:
• Press
0. Confirm
to accept the changes.
• Press
1. Cancel
to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure to enable the Transition Preview mode.
DSK Drop
The DSK Drop setting determines how the DSK behaves when a source is taken on the PGM Bus .
Use the following procedure to set the DSK Drop feature:
1. Navigate to the Personality Menu as follows:
• Press MENU to display the Main Menu .
• Press 6. Personality to display the Personality Menu .
Personality Menu
2. Toggle the 1. DSK Drop button between Auto and Manual as follows:
• Manual — Use this option to set the DSK Drop to take sources on the PGM Bus
and have no effect on the DSK – the key remains.
• Auto — Use this option to set the DSK Drop to have an on-air downstream key
automatically dropped (turned off) when any source is taken directly on the PGM
Bus .
3. Press MENU to display the Installation Change Screen .
4. Accept or cancel these changes as follows:
• Press 0. Confirm to accept the changes.
• Press 1. Cancel to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure to set the DSK Drop feature.
Personality - Synergy 100
0. Trans PV
1. DSK Drop On
Manual
MENU
Exit 100
Previous SEL
Accept
10
Down
1
Up
2. SleepTime 10 min
3. Menu Bttn
Menu Only
4. AutoRcall On
5. GPIO Mode Disabled
6. Show Knob 0
7. Audio Cut
On