Ross Synergy 100, Installation Manual, Page: 97 / 246

Synergy 100 Installation Guide (v16.10-S100) BNC Configuration and Check • 6–9
Panel Menu
3. Select the crosspoint button you want to assign to an input as follows:
• Press 0. Button .
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the
crosspoint button you want to assign to an input BNC.
• Press the right SEL button to accept the new settings.
4. Assign an input to the selected crosspoint button as follows:
• Press
1. Input
.
• Use the UP ARROW or DOWN ARROW ( 1 or 10 ) buttons to select the input you
want to assign to the selected button.
• Press the right SEL button to accept the new settings.
5. Press
MENU
to display the Installation Change Screen .
6. Accept or cancel these changes as follows:
• Press
0. Confirm
to accept the changes.
• Press 1. Cancel to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure for setting up your control panel buttons.
Panel
0. Button
1. Input
1
Black
MENU
Exit 100
Previous SEL
Accept
10
Down
1
Up