Ross Synergy 100, Installation Manual, Page: 94 / 246

6–6 • BNC Configuration and Check Synergy 100 Installation Guide (v16.10-S100)
4. Select the Input BNC you want to assign to the selected tally as follows:
• Press
1. Input
.
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select the input
BNC that you want to assign to the selected tally.
• Press the right
SEL
button to accept the new settings.
5. Select the type of tally you want to assign to the input BNC as follows:
• Press
2. Type .
• Use the
UP ARROW
or
DOWN ARROW ( 1
or
10 )
buttons to select the type of
tally you want to assign. You can select between the following:
~
On Air
— Use this option to select a standard tally in which the switcher logic
closes the relay (lights the tally) when a selected input forms part of the
program output.
~
Preview
— Use this option to trigger the tally relay when a selected input
forms part of the preview output.
~
Aux
— Use this option to have one of the ten
Aux Buses
to trigger the tally
relay when the selected BNC is chosen on the selected Aux Bus . For example,
if
Tally 8
is associated with
BNC 8
and its “type” is
Aux Bus 5
, the relay
closes whenever
BNC 8
is selected on
Aux Bus 5
.
• Press the right
SEL
button to accept the new settings.
6. Press
MENU
to display the Installation Change Screen .
7. Accept or cancel these changes as follows:
• Press
0. Confirm
to accept the changes.
• Press
1. Cancel
to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure for setting up BNC tallies.
Setting Up Auto Keys
The Inputs Sub-Menu allows you to associate key (alpha) signals with their fill (video) inputs (for
example, associating CG Video with CG Alpha ). This association completely simplifies the keying
process on the switcher. When you punch up a key source on the key bus, its fill and alpha are
automatically selected.
Use the following procedure to set up your alpha inputs:
1. Navigate to the Inputs Menu as follows:
• Press MENU to display the Main Menu .
• Press 1. Inputs to display the Inputs Menu .