Ross Synergy 100, Installation Manual, Page: 57 / 246

Synergy 100 Installation Guide (v16.10-S100) Installation • 2–23
•
SW8
– Software Upgrade . This switch controls the ability to upgrade software
from a storage device:
~
Up
: Software can be upgraded from a storage device, such as a floppy disk or
USB key. Refer to the section “ Software Upgrade ” on page 2-24 for
instructions.
~
Down
: Software can not be upgraded from a storage device. This is the default
position.
6. Watch Dog Jumper
Leave the
Watch Dog Jumper
in the default
DIS
(disabled or
Up
) position.
System Reset Notes
Please note the following important point regarding the system reset function:
Note Place the switch in the Up position when you want to restrict access to
installation menus. For certain facilities, this setting is recommended
once installation is complete.
Note
The rack frame stores all installation, personality, memories, and the
current video state. The control panel keeps track of the current menu
and the settings of all buttons. Resetting the frame changes the current
video state. Simply turning the frame off, or loosing power to the
control panel, will
not reset the video state, because a frame reset has
not been initiated.