Rosemount P330, Installation And Operation Manual, Page: 66 / 92

Rosemount Model P330 Pressure Validator
6-8
Press F1 to run or stop the test (Figure 6-14 and Figure 6-15):
FIGURE 6-14. mA Ramp Display
Before and After Starting Test.
FIGURE 6-15. mA Ramp Display
Before and After Stopping Test.
mA Value
In mA Value mode, the validator looks for a specific value and displays
CURRENT OK
if the system meets the value. Set the value, as shown in
Figure 6-16:
FIGURE 6-16. Selecting mA Value
from the Output Menu. Entering New
Value and Turning On 24 V Power.
24 Volt
24 Volt Output sets the validator’s internal power supply on or off.
24
VOLT
and
NO OUTPUT
are on the second
SELECT OUTPUT
screen.
Set the 24 V on or off, as shown in Figure 6-17:
FIGURE 6-17. Setting 24 V in the
Output Menu.
P
330
_28
A
P
33
0_
2
9
A
P
330
_3
0A
P
330
_2
2A
s