Rosemount P330, Installation And Operation Manual, Page: 22 / 92

Rosemount Model P330 Pressure Validator
3-2
Display Panel The display panel is divided into three sections: the input (to validator),
the output (from validator), and the status line/soft box. Figure 3-2
shows two typical displays, the first one with a status line and the
second one with soft boxes:
See Table 3-1 for a summary of display panel terminology.
TABLE 3-1. Display Panel Terminology.
Input Display
The
INPUT
display shows input to the validator. For example, in
Pressure-to-Voltage task mode, the validator sends pressure to a
transmitter and receives a voltage signal from a transmitter. The
INPUT
display is volts, as shown in Figure 3-2 above.
FIGURE 3-1. Model P330 Control
Panel.
Display Panel
Validation
Connection
Sockets
Enter Key
Function Keys
Hard Keys
Arrow Keys
Soft Box Display
Input
Output
Status Line Display
FIGURE 3-2. Display Panels Showing
a Status Line and a Softbox Display
P
330
_18
a.e
p
s
Display Panel Terminology Refers To:
INPUT
Signal coming from the transmitter to the validator
OUTPUT
Signal going from validator to transmitter (usually
pressure)
STATUS LINE
(a single line across the
bottom of the display panel)
Displays Task mode setting andStore mode setting.
Indicates that the validator is in task mode
SOFT BOX
(two boxes across the bottom of
the display panel)
Indicates that a selection must be made with F1, F2,
or both