Manual
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
Start-up
B0063191 / 1.3
84
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
7.9
System parameters
Note
The selected system configuration should be documented in the form
“System configuration“ at the end of this manual or in the equipment
documentation. This information is required in case a system needs to be
exchanged.
The general adjustments are specified by configuring the system parameters.
For accessing, select the “system parameter configuration“ mode and confirm with
ENTER
.
System parameter 1:
Setting the dialogue language.
Fig. 61: Selecting the language
Selectable languages:
• English
• German
• Italian (in preparation)
• French (in preparation)
• Spanish (in preparation)
System parameter 2:
Determine the type of system.
Fig. 62: System type
The type of the system cannot be modified
System parameter 3:
Selecting the dimensions for the display (mm / inch).
When changing the measurement units, the sheet metal thicknesses of the stored program
parameters are also converted into the new dimension.
Fig. 63: Selecting the dimensions for the display
system parameter: 1
language
english
system parameter: 2
system type
standard
system parameter: 3
display value in
mm
