Manual
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
Mounting
B0063191 / 1.3
22
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
4.3.6 Electromagnetic interference
Electromagnetic interference can affect the measurement accuracy of sensors. Therefore it is not
allowed to mount the sensors in direct proximity of equipment which emits electromagnetic
interference.
The sensor cables should not be laid adjacent to conductions having a large disturbance potential,
e.g. power cables. This applies especially to longer cable lengths.
4.3.7 Compliance with the transport direction at sensor mounting
Mounting of the sensors regarding to the
following illustration will ensure reliable double
sheet detection.
When mounting in "longitudinal direction",
the measuring must be performed only
dynamically (sheet is not allowed to stand
still between the sensors).
Fig. 10: Direction of transport
