background image

Assigning Convenient Functions to the Pads (PAD MODE)

105

105

Specifying the tone played by each pad

1 . 

In the NOTE PAD screen, press a pad to select the 

pad that you want to edit.

You can also select a pad by using the [E1] knob or by 

directly touching an icon in the screen.

2 . 

Move the cursor to the parameter that you want 

to edit, and edit the value.

You can also use the [E4]–[E6] knobs to directly edit the 

settings.

Zone/Note number/Velocity

Corresponding tone name/drum instrument name

Pad number

3 . 

Repeat steps 1–2 to make settings for other pads 

as necessary.

4 . 

To save the settings, choose SYSTEM WRITE [E3] to 

save them to the system.

MEMO

The parameters that you edit here are the same as the system 

parameters “Pad 1–16 Zone”, “Pad 1–16 Note Number”, and “Pad 

1–16 Velocity” that you can edit in SYSTEM/NOTE PAD. They work in 

the same way when you edit them in the SYSTEM screen.

Selecting Partials and Turning Them On/Off 

(Partial Sw/Sel)

You can use the pads to select and turn on/off the partials that 

you’re editing.

Pad

Explanation

[1] 

Select partial 1

[2] 

Select partial 2

[3] 

Select partial 3

[4] 

Select partial 4

[5] 

Turn partial 1 on/off

Pad

Explanation

[6] 

Turn partial 2 on/off

[7] 

Turn partial 3 on/off

[8] 

Turn partial 4 on/off

MEMO

 

¹

For a drum kit tone, you can select and turn on/off the wave 

of the selected key.

 

¹

This function might be disabled, depending on the tone 

being used.

Controlling a DAW 

(DAW Control)

You can use the pads to control supported DAW software (Logic Pro 

X/MainStage/Ableton Live).

NOTE

 

¹

Use this function when you want to use the “DAW CTRL 

function” to control Logic Pro X/MainStage/Ableton Live on a 

computer connected via USB.

 

¹

In order to connect the FANTOM with a computer, you’ll need 

to install a USB driver. For details on installing the USB driver, 

refer to “Connecting to Your Computer” (p. 142).

 

¹

To use the DAW/CTRL function in Logic/MainStage, you must 

install the dedicated “Logic/MainStage plug-in” as well as the 

USB driver. 

For details on using the DAW CTRL function and how to 

install the plugin, refer to “DAW Integration Usage Guide” 

(PDF).

Controlling Logic Pro X

Pad

Function

Explanation

[1]–[4] 

Recall Screen 

Set 1–4

Recall screen sets 1–4.

[5] 

ZOOM 

Horizontal IN

Zooms-in horizontally.

[6] 

ZOOM 

Horizontal 

OUT

Zooms-out horizontally.

[7] 

ZOOM Vertical 

IN

Zooms-in vertically.

[8] 

ZOOM Vertical 

OUT

Zooms-out vertically.

[9] 

Open Marker 

List / Close 

Window

Opens/closes the marker list.

[13] 

Go to Next 

Marker

Moves to the next marker.

[14] 

Go to Previous 

Marker

Moves to the previous marker.

[15] 

Song Position 

by measure

Advances the locate position by one 

measure.

[16] 

Play or Stop

While playing, operates as the stop 

button. While stopped, operates as 

the play button.

Summary of Contents for FANTOM-06































































































































































































Reviews: