Roland FANTOM-06 Reference Manual Download

Page: 104 / 190

104

Assigning Convenient Functions to the Pads

(PAD MODE)

Basic PAD MODE Operations

You can assign various useful functions to the 16 pads of the

FANTOM, such as playing samples or muting zones. These functions

are called pad modes.

MEMO

Pad mode settings are saved in the scene.

1 .

Press the [PAD MODE] button.

The PAD MODE screen appears.

2 .

Press a pad [1]–[8] or [16] to select a function.

The pad mode changes, and you return to the previous

screen.
You can also switch pad modes by touching an icon in the

screen.

Pad

Function

Explanation

[1]

Sample Pad

The pads play samples.

[2]

Note Pad

The pads play tones.

[3]

Partial Sw/Sel

The pads select partials and turn

them on/off.

[4]

DAW Control

The pads control your DAW software.

[5]

Zone Mute

The pads turn zone mute on/off.

[6]

Zone Solo

The pads turn zone solo on/off.

[7]

Kbd Sw Group

The pads turn the keyboard switch

group on/off.

[8]

Rhythm Pattern

The pads play rhythm patterns.

[9]

Pattern

The pads play the sequencer

patterns.

[10]

Variation Play

The pads play the sequencer

variations.

[11]

Group Play

The pads play back the sequencer

group.

[16]

System

The pads use the Pad Mode system

settings.

MEMO

After selecting a pad mode, you can hold down the [SHIFT] button

and press the [PAD MODE] button to access the edit screen for the

selected function.

Playing Samples

(Sample Pad)

The pads play samples.

MEMO

For details on using the sample pads, refer to “Pressing Pads to Play

Pad Samples” (p. 93).

Playing Tones

(Note Pad)

In the same way as using the keyboard to play sounds, you can play

tones by pressing the pads. Since you can specify the zone, note

number, and velocity for each pad, you can (for example) use the

keyboard to play the tone of zone 1 while using the pads to play

the drum kit tone of zone 10.

MEMO

Settings for each pad are saved as system settings. You can’t make

pad settings independently for each scene.

Pressing a pad will play a tone according to the settings of

each pad.

Menu

Explanation

[E1]

Selects a pad.

[E3] SYSTEM WRITE

Saves the edited settings to the system.

[E4]

Selects the zone played by the selected

pad.

[E5]

Selects the note number played by the

selected pad.
The selected note is indicated by a

above the keyboard in the screen.

[E6]

Specifies the velocity played by the

selected pad.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands