Roland FANTOM-06 Reference Manual Download

Page: 49 / 190

Using the SYNTH CTRL

Use the FILTER section knobs and buttons to change the sound

in real time. You can use the buttons in the OSC, AMP, FX and LFO

sections to jump to the settings screen for each section.

1 .

Select the scene that you want to play.

2 .

Operate the edit knobs and buttons to edit the

sound.

The edited parameter and its value appear in a popup

window.

OSC (Oscillator) section

This selects the waveform that determines the character of

the sound.

Controller

Explanation

[OSC] button

Displays OSC PRM in the TONE EDIT screen.

FILTER section

This specifies the brightness and thickness of the sound.

Controller

Explanation

[CUTOFF] knob

Adjusts the cutoff

frequency of the

filter.

Type:LPF

CUTOFF

RESONANCE

[RESONANCE] knob

Specifies the

resonance of filter.
This adds a

distinctive

character to the

sound.

[FILTER TYPE] button

Specifies the type of filter.
The filter response changes according to

the type you select.

[PARAM] button

Accesses the FILTER setting screen of the

TONE EDIT ZOOM screen.

AMP section

This specifies time-varying changes in pitch, tonal character,

and volume.

Controller

Explanation

[AMP] button

Displays AMP ENV in the TONE EDIT screen.

FX section

This applies various effects to the sound.

Controller

Explanation

[FX] button

Access the MFX EDIT screen.

NOTE

Unlike when using the general-purpose controllers, the changes

that you make using the edit knobs always apply only to the tone

of the current zone.
If you’re using the keyboard to play multiple layered tones, select

the zone that you want to edit as the current zone before you

operate the knobs.
Depending on the tone type, the tone might consist of multiple

partials, but the changes you make using the knobs apply to the

partial that is selected.
For details on how to select a partial and use the various TONE EDIT

screens, refer to “Editing a Tone” (p. 58).

MEMO

If you want to keep an edited tone, save the tone (p. 64).

For details on each parameter, refer to “Parameter Guide”

(PDF).

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands