Roland FANTOM-06 Reference Manual Download

Page: 92 / 190

Editing Multisamples and Kbd Samples

Menu

Explanation

[E4] PREVIEW

Previews the sample selected by the

cursor.

[E6] NEXT

Moves to the next operation.

Touching a check box

while holding the

[SHIFT] button

Selects the check boxes for multiple

samples all at once, from the sample at the

cursor position to the sample you touch

while holding down the [SHIFT] button.

10 .

Select [E6] NEXT.

The IMPORT SAMPLE (SELECT DESTINATION) screen is

displayed. This list shows the samples in the FANTOM.

No . marked/no . of items

Imported samples

Samples used by ZEN-Core/

drum tones

11 .

Touch the check box to the left of a sample to

select it as the import destination.

* You can’t select the check box if there is already a sample at that

import destination.

12 .

Select [E6] EXECUTE.

A confirmation message appears.

13 .

Select [E5] OK.

The sample is imported, and the unit returns to the IMPORT

MENU screen.
If you decide to cancel, choose [E6] CANCEL.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands