Roland FANTOM-06 Reference Manual Download

Page: 95 / 190

The FANTOM lets you create samples by sampling the following

sounds.

Keyboard performance

Sound input from MIC/LINE INPUT L (MONO), R jacks (an

audio device or microphone)

Sound input from the USB COMPUTER port

Preparing for Sampling

1 .

As necessary, connect the device that you want

to sample (an audio device or mic) to MIC/LINE

INPUT L (MONO), R jacks.

2 .

Press the [SAMPLING] button to make it light.

The SAMPLING MENU appears.

3 .

Touch <SAMPLING To Pad>.

The SAMPLING STANDBY screen appears.

MEMO

If there is already a pad sample in the pad to which you’re

sampling, the message “Sample Already Exists. Overwrite?” appears.

Press [E5] OK if you want to overwrite, or press [E6] CANCEL if you

want to cancel.

Level meter

Time counter

Rec status

Click ON/OFF

SAMPLE PAD display area

AUDIO IN ON/OFF

Menu

Explanation

[E1] TRIG/IN

Selects which parameters are set by using

[E2]–[E4].

[E2]

[E1] = TRIG: AUTO TRIG

Turns AUTO TRIGGER on/off

[E1] = IN: MIC/LINE

Selects the input jack to use.

[E3]

[E1] = TRIG: AUTO TRIGGER LEVEL

Specifies the AUTO TRIGGER LEVEL

[E1] = IN: (None)

[E4]

[E1] = TRIG: TEMPO

Changes the click tempo

[E1] = IN: REC LEVEL

Set the sampling level.

[E5] CANCEL

Cancels the sampling standby state.

[E6] START

Starts sampling.

<Click>

Turns the click tone on/off.

<Sampling Mode>

Selects the sampling mode (input source).

<Format>

Selects the sampling format.

4 .

Note that the bank and number of the sample pad

you’re sampling are shown in the SAMPLE PAD

display area.

In this example, the BANK 1-1 pad is selected.

5 .

If you want to change the bank and number of the

sample pad, touch <SAMPLE PAD>.

In the SAMPLING DESTINATION (PAD) screen, select the bank

and number of the pad to which you want to sample, and

then select [E6] SELECT.

MEMO

If there is already a pad sample in the pad to which you are

sampling, the message “Sample Already Exists. Overwrite?” appears.

Press [E5] OK if you want to overwrite, or press [E6] CANCEL if you

want to cancel.

6 .

Touch <Sampling Mode> and select the sampling

mode.

Parameter

Explanation

KBD+INPUT

Samples the keyboard performance and

the audio input from MIC/LINE INPUT L

(MONO), R jacks and the USB COMPUTER

port.

KBD

Samples the keyboard performance.

INPUT

Samples the audio input from MIC/LINE

INPUT jacks 1, 2 and the USB COMPUTER

port.

Sampling

(To Pad)

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands