Roland FANTOM-06 Reference Manual Download Page 24

Page: 24 / 190

Getting Ready

If You’re Using the FANTOM-08

If you want to place the FANTOM-08 on a stand, please use the KS-12, KS-10Z, KS-G8B, or KS-20X stands manufactured by Roland.

KS-10Z

Adjust so that the

height does not

exceed 1 meter.

Adjust the width of the stand so that the

stand arms are lined up between the

rubber feet of the FANTOM.

Top view

Align the front of

the FANTOM with

the front of the

stand

KS-12

Adjust the horizontal width of the

stand so that the rubber feet on the

keyboard side of the FANTOM fit

into the holes that are provided to

accommodate them.

Top view

KS-G8B

Align the front of

the FANTOM with

the front of the

stand’s upper arm.

Align the center of the

FANTOM with the center of

the stand.

KS-20X

Line up the FANTOM

so that it rests on

the rubber rings of

the stand.

Open up the stand from closed position past

the fourth stop (with the first stop being the

closed position, and the fifth stop being the

fully open position).

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands