Roland FANTOM-06 Reference Manual Download

Page: 40 / 190

Playing Arpeggios

Using the Arpeggiator

The FANTOM has an arpeggiator that can automatically generate

arpeggios.

MEMO

Arpeggio settings are saved in the scene.

1 .

Press the [ZONE VIEW] button.

The ZONE VIEW screen appears.
Select the VIEW number as appropriate for the number of

zones you are using.

2 .

In the ZONE VIEW screen, turn ARP “ON” for the

zone that you want to arpeggiate.

NOTE

When the [ARPEGGIO] button is “ON”, arpeggios can be played in

zones whose ARP is “ON”.

1 ZONE VIEW

4 ZONE VIEW

16 ZONE VIEW

8 ZONE VIEW

MEMO

You can turn ARP “ON” for multiple zones and make them play

arpeggios simultaneously.

3 .

Press the [ARPEGGIO] button to make it light.

The ARPEGGIO screen appears.

Menu

Explanation

[E1] HOLD

Holds the arpeggio.

[E6] EXIT

Returns to the previous screen.

MEMO

By setting the system parameter “Arpeggio Switch Mode” (p. 165),

you can turn the arpeggiator on without accessing the ARPEGGIO

screen.

4 .

Play a chord on the keyboard.

An arpeggio is sounded by the zone that is turned on,

according to the notes of the chord that you play.

5 .

Move the cursor to “STYLE” and change the style.

The arpeggio performance changes according to the style

that you select.

6 .

To turn the arpeggiator off, press the [ARPEGGIO]

button once again to make it go dark.

MEMO

By using this together with the chord memory function, you can

easily play a variety of arpeggio sounds with a single finger (p.

43).

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands