Roland FANTOM-06 Reference Manual Download Page 63

Page: 63 / 190

Editing a Tone

SuperNATURAL Electric Piano Tone

(TONE TYPE: SN-EP)

For SuperNATURAL E.Piano tones, you can select one instrument

and edit parameters that are specific to that instrument.

MFX

Inst

MEMO

To use the SN-EP tones, an SN-EP tone expansion must be installed

(p. 171).
The SN-EP expansion is pre-installed by factory default.

1 .

Select a tone whose TONE TYPE is “SN-EP”, and

then touch [MENU] button

<TONE EDIT>.

The TONE EDIT SN-EP screen appears.

Explanation

[E1]

Scrolls up or down through the tabs.

[E2]

Scrolls the cursor up/down to select a parameter.

[E6]

Edits the parameter selected by the cursor.

<UTILITY>

Accesses the UTILITY window.

2 .

Move the cursor to the desired parameter and edit

the value.

Tab

Explanation

COMMON

Settings for the entire tone.

INST

Settings for the instrument and its corresponding

parameters.

MFX

Settings related to multi-effects.

MFX

CONTROL

Settings for controlling MFX via MIDI.

MODEL Tone

(TONE TYPE: MODEL)

With the Model tones, you edit the parameters that are unique to

their respective model bank.

MFX

VCO-1

HPF

LFO

VCF

ENV-1

VCA

ENV-2

VCO-2

Model Bank: JP8

MEMO

To use the Model tones, a Model tone expansion must be installed.
For details on how to install, refer to “Adding More Tones

(EXPANSION)” (p. 171).

1 .

Select a tone for which the tone type is “MODEL”,

and touch the [MENU] button

<TONE EDIT>.

The TONE EDIT screen appears.

Menu

Explanation

[E1]

Scrolls the tab up/down.

[E2]–[E6]

Edits the corresponding parameters. (The

corresponding parameter changes depending on

the cursor position.)

<To PRO>

Displays the TONE EDIT PRO screen.

<UTILITY>

Displays the UTILITY window.

2 .

Move the cursor to the desired parameter, and

edit the value.

The tabs and parameters differ depending on the model bank

selected.
For details on the parameters, see the Owner’s Manual for each

expansion.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands