Roland FANTOM-06 Reference Manual Download Page 173

Page: 173 / 190

Settings for the Entire FANTOM

173

2 .

Move the cursor to the desired parameter and edit

the value.

Tab

Explanation

COMMON

Settings for the entire tone.

INST

Settings for the instrument and its

corresponding parameters.

MFX

Settings related to multi-effects.

MFX CONTROL

Settings for controlling MFX via MIDI.

Selecting a Model tone

1 .

Switch to the ZONE VIEW screen.

2 .

Move the cursor to TYPE, and select “MODEL”.

3 .

Move the cursor to BANK, and select a model

bank.

4 .

Move the cursor to the tone name (number), and

use the [VALUE] dial or the [INC] [DEC] buttons to

select a tone.

Editing a Model tone

With the Model tones, you edit the parameters that are unique to

their respective model bank.

MFX

VCO-1

HPF

LFO

VCF

ENV-1

VCA

ENV-2

VCO-2

Model Bank: JP8

1 .

Select a tone for which the tone type is “MODEL”,

and touch the [MENU] button

<TONE EDIT>.

The TONE EDIT screen appears.

Menu

Explanation

[E1]

Scrolls the tab up/down.

[E2]–[E6]

Edits the corresponding parameters.

(The corresponding parameter changes

depending on the cursor position.)

<To PRO>

Displays the TONE EDIT PRO screen.

<UTILITY>

Displays the UTILITY window.

2 .

Move the cursor to the desired parameter, and

edit the value.

The tabs and parameters differ depending on the model bank

selected.
For details on the parameters, see the Owner’s Manual for each

expansion.

Deleting the License Information

This deletes Roland Cloud license information from the FANTOM

unit and also deletes the previously-installed content data that is

authorized by that license information.

If you are installing content that is distributed from Roland Cloud,

and the message “Incorrect License! Please Remove License”

appears, use the Remove License function to delete the previously-

installed license information.

NOTE

When you use the Remove License function to delete the

previously-installed license information, the content data that is

authorized by the deleted license information is also deleted, and

will no longer be usable.

1 .

On the EXPANSION screen, select [E4] REMOVE

LICENSE.

A confirmation message appears.
If you decide to choose, select [E6] CANCEL.

2 .

Select [E5] OK.

The license information is deleted.

NOTE

Never turn off the power or remove the USB flash drives while the

screen indicates “working”.

3 .

Turn the power off, and then on again.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Roland FANTOM-06, Reference Manual, Page: 173 / 190

Search results

Summary of Contents for FANTOM-06

Reviews: