Roland FANTOM-06 Reference Manual Download Page 84

Page: 84 / 190

About the SAMPLING MENU

Importing an Audio File

(To Keyboard)

“IMPORT To Keyboard” combines all of the steps you need to make

the audio files you imported playable from the keyboard.
Use these steps to create a user tone at the same time that uses the

audio files you import.

1 .

To begin, put the audio files you want to import

into the folder you choose on a USB flash drive.

NOTE

Use a USB flash drive that you’ve already formatted on the

FANTOM.

This operation might take some time, depending on the size

of the file to import.

2 .

Press the [SAMPLING] button.

The SAMPLING MENU screen appears.

3 .

Touch IMPORT <To Keyboard>.

The IMPORT SAMPLE TO KBD (SELECT SOURCE) screen

appears.

Menu

Explanation

[E2] PREVIEW

You can preview the audio file while

pressing this knob.

[E3] Preview Level

Sets the volume used for previewing.
This is a system parameter. You can also set

this from MENU

SYSTEM

SOUND.

[E6] IMPORT

Advances to the next operation.

4 .

Select the file to be used.

MEMO

You can select the INTERNAL STORAGE tab and import the audio

files in the LIBRARY folder.

NOTE

If a filename contains the following characters, that file cannot be

imported into the FANTOM.

Also, files with double-byte characters and other special characters

cannot be imported.

5 .

Select [E6] IMPORT.

The IMPORT SAMPLE TO KBD (SETTING) screen appears.

Name of file to be imported

6 .

Edit the desired parameters.

Menu

Explanation

Destination Tone

Select the number of the user tone that

uses the audio file you imported.

Emphasis

When this is “ON”, pre-emphasis

(which emphasizes the high end of the

sample) is applied to the imported sound.

[E1] PREVIEW

You can preview the audio file while

pressing this knob.

[E2] Loop Mode

Selects how the sample is played back

(p. 103).

[E3] Original Key

Sets the note number that plays back the

sample at the same pitch at which it was

recorded.

[E4] APPLY EMPHASIS

When this is “ON”, the high end of the

imported sample’s sound is emphasized.

[E5] SAVE TO

STORAGE

The sampled wave is saved in WAV format

on internal storage (in the INT:KBD_SMPL

folder).

[E6] EXECUTE

Executes the operation.

7 .

When you are finished making settings, select [E6]

EXECUTE.

A confirmation message appears.

8 .

Select [E5] OK.

The IMPORT operation is executed.
If you decide to cancel, select [E6] CANCEL.
This creates a user tone that uses the imported waveform.

The user tone that was created is selected in the current

zone and shown on the screen (ZONE VIEW1 display).

9 .

Play the keyboard.

You can play the imported sound in the current zone, with

the pitches matching the notes you play.

Importing an Audio File

(To Pad)

“IMPORT To Pad” combines all of the steps you need to make the

audio files you imported playable from the pad.
For details, refer to “Importing an Audio File (To Pad)” (p. 97).

MEMO

A preview is available in the file selection screen.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands