Roland FANTOM-06 Reference Manual Download

Page: 44 / 190

Performing with Rhythm Patterns

What is a rhythm pattern?

The FANTOM can automatically play a variety of rhythms while you

perform.
The performance data for these rhythms are called “rhythm

patterns”.
In a band, the drums typically repeat fixed patterns that are one or

two measures long. A wide variety of performance data used as the

basis of these repetitions is built-in and organized into categories

for uses such as intro, verse, fill, and ending. The type of each

pattern is indicated by its rhythm pattern name.

Pattern

Explanation

Intro

These are performance patterns used during

the introduction.

Verse1, 2

These are the main performance patterns. “1” is

the basic pattern, and “2” is a variation of it.

Fill-In1, 2

These are ornamental performance patterns

inserted between phrases. Choose either “1”

or “2” depending on the pattern that follows

the fill.

Ending

These are performance patterns used during

the ending of the song.

MEMO

Rhythm pattern settings are saved in the scene.

What is a rhythm pattern group?

A “rhythm pattern group” contains a set of six rhythm patterns.
You can specify a rhythm pattern for Intro, Pattern A–Pattern D, and

Ending, and save them as a rhythm pattern group.
The FANTOM provides the following rhythm pattern group.

Rhythm Pattern

Group

Explanation

PRST

(PRESET)

These are rhythm pattern groups that cannot

be rewritten.
Rhythm pattern settings that you edit can be

saved as a user group.

USER

These are rhythm pattern groups that can be

saved in the FANTOM.

What is a drum kit?

The drum sounds played by the rhythm patterns are called a “drum

kit”.
The ZONE 10 tone (Drum Kit tone) of the current scene is used as

the drum kit.

Selecting/Playing Rhythm Patterns

1 .

Press the [RHYTHM PTN] button.

The RHYTHM PATTERN screen appears.

Rhythm Pattern Number

Rhythm Pattern Name

Number of measures in the

rhythm pattern

Current playback

position

Bank

Rhythm Group Number/Name

Drum Kit Number/Name

Zone

MEMO

When changing the zone that plays the rhythm pattern, move to

the zone you want to play.

Menu

Explanation

[E1] KEY TRIGGER

If this is on, the rhythm pattern starts the

moment that you play the keyboard.

[E6] LEVEL

Specifies the volume of the drum kit.

2 .

Move the cursor to the “rhythm group number”,

and select a rhythm pattern group.

3 .

Move the cursor to the drum kit number, and

select a drum kit.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands