Roland FANTOM-06 Reference Manual Download Page 68

Page: 68 / 190

Editing the Effects

Editing Effects Shared by All Zones

Here’s how to edit the effect units that are shared by all zones, such

as IFX 1–2, CHORUS, and REVERB.

1 .

On the EFFECTS EDIT screen, touch the

<INTERNAL> tab.

INTERNAL tab

2 .

Select a zone.

Turning each effect on/off

3 .

In the screen, touch <IFX1>, <IFX2>, <CHORUS>,

or <REVERB> to turn each effect on/off.

Editing the parameters

3 .

In the section that you want to edit, touch <EDIT>.

The EFFECTS EDIT ZOOM screen appears.

IFX1/IFX2

In this screen you can edit major parameters such as the IFX

on/off status, the IFX connection order, the effect type, and

the send level and output destination from the IFX.

CHORUS/REVERB

In this screen, you can edit major parameters such as

the CHORUS/REVERB on/off status, the send levels from

the zone, the effect type, the effect level, and the output

destination.

4 .

Move the cursor to the desired parameter, and

edit the value.

5 .

If you want to make detailed edits, touch <EDIT>

in the section that you want to edit.

The EFFECT PRO EDIT screen appears.

Menu

Explanation

[E1]

Scrolls the cursor up or down.

[E6]

Edits the value of the parameter selected by the

cursor.

6 .

Move the cursor to the desired parameter, and

edit the value.

NOTE

The edited effect settings are temporary. They will be lost if you

turn off the power, or if you select another scene. If you want to

keep the settings, save the scene.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Roland FANTOM-06, Reference Manual, Page: 68 / 190

Search results

Summary of Contents for FANTOM-06

Reviews: