Roland FANTOM-06 Reference Manual Download

Page: 148 / 190

Using the Vocoder

148

7 .

In the VOCODER section, touch <EDIT>.

The VOCODER ZONE SELECT screen appears.

Information for the current zone

Bank, number, and name of the VOCODER SETTING

Zone Level

MEMO

You can also move directly to this screen from the ZONE VIEW

screen by holding down the [SHIFT] button and touching the

<VOC> icon in the upper right of the screen.

8 .

Touch the icon of the zone that you want to use as

the carrier.

The icon of the zone you touch becomes brighter, and

operates as the carrier of the vocoder.

Zone selected as carrier

Current zone

MEMO

The zone selected as the carrier will no longer produce

sound.

You can also select multiple zones for use as the carrier.

As the carrier, select the zone(s) that you are playing from the

keyboard.

When you turn a zone’s icon on (brighter), the current zone

follows.

9 .

As necessary, turn [E3–E5] SET RECOMMENDED

TONE on.

This assigns to the current zone a tone that is optimal as a

carrier for the current VOCODER SETTING.

MEMO

The vocoder does not work if you specify the carrier as an EXT

ZONE or the zone selected for PAD ZONE SELECT.

10 .

Move the cursor to the VOCODER SETTING

number, and use the [VALUE] dial or the [INC]

[DEC] buttons to select the VOCODER SETTING.

MEMO

The VOCODER SETTING is a template that collects settings

for the various vocoder parameters. By selecting a VOCODER

SETTING, you can easily try out various vocoder settings.

You can also customize your own vocoder settings and save

them to the user bank (p. 150).

The following VOCODER SETTING templates are provided as

presets.

PRESET

Name

Explanation

001

Voc.Large

Choir

A rich choir-like sound with spacious

stereo.

002

Voc.Future

Lead

A sharply distinctive sound with an

aggressively changing Sync tone.

003

Voc.Ensamble A standard ensemble sound.

004

Voc.Robot

A synthetic-feeling sound reminiscent

of a robot.

005

Voc.5th Stack

A sound that also provides harmony

at a fifth.

006

Voc.VP-330

A distinctive sound reminiscent of the

VP-330.

007

Voc.Saw

A sound that uses a simple sawtooth

wave for high clarity.

008

Voc.Noise

A sound that creates a vocal character

resembling an explosion.

009

Voc.Sub Choir

Pressing the Mod lever adds harmony.

010

Voc.Sub Choir

Pressing the Mod lever adds soft

harmony.

SET RECOMMENDED TONE

Although you can freely select the tone that’s used as

the carrier, selecting [E3–E5] SET RECOMMENDED TONE

will automatically assign the current zone a carrier tone

that is ideal for the current VOCODER SETTING.

Each VOCODER SETTING has a tone that is assigned by

SET RECOMMENDED TONE.

SET RECOMMENDED TONE turns on/off each time

you press [E3–E5]. If you select a different VOCODER

SETTING when this is on, the recommended tone also

changes in tandem each time you make a selection. If

you select a different VOCODER SETTING when this is

off, the tone is maintained.

SET RECOMMENDED

TONE: OFF

SET RECOMMENDED

TONE: ON

When you save the VOCODER SETTING (p. 150),

the tone of the current zone is remembered as the

RECOMMENDED TONE.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands