Roland FANTOM-06 Reference Manual Download

Page: 150 / 190

Using the Vocoder

150

Saving the VOCODER SETTING

After editing the vocoder settings, save them in the VOCODER

SETTING user bank.

1 .

On the VOCODER EDIT screen, touch <WRITE>.

The VOCODER SETTING WRITE screen appears.

2 .

If you want to edit the name, select [E1] RENAME.

After you have edited the name, select [E6] OK to close the

window.

3 .

Use the [VALUE] dial or the [DEC] [INC] buttons to

select the save-destination.

4 .

Select [E6] OK.

A confirmation message appears.
If you decide to cancel, select [E6] CANCEL.

5 .

Select [E5] OK.

The settings are saved in the user bank.

MEMO

If you also save the scene after you save the settings in the user

bank, you can then simply select the scene next time, and the

VOCODER SETTING you saved is recalled in tandem.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands