Roland DXY-1100, Command Reference Manual

Page: 27 / 156

If a parameter outside the range - 5 to 5 is specified, it is ignored and the previous value re­
mains valid.
The initial value of p = 0 produces a solid line.
The “ B” command (dotted line pitch specification) may be specified anywhere in the program.
When a line type is set with this command, it is valid until power is switched OFF or the L or ^ L T
command is used to set
a new parameter.
EXAMPLE
10
' "L” COMMAND
20 LPRINT "M0,1200"
30 FOR I = - 5 TO 5
40
LPRINT "L”; I
50
LPRINT "PP=” ;I
60
LPRINT "I1000,0
7 0 LPRINT "R-1120,
8 0 NEXT I
9 0 LPRINT "H
"
* *
Specifies the line type.
" Draws a straight line of 1000 in the
1 0 0 ” X direction.
Moves — 1120 in the X direction and
100 in the Y direction with the pen up.
This loop is executed 6 times.
Fig. L-4
2-17