Roland DXY-1100, Command Reference Manual

Page: 106 / 156

S S Select Standard
FORMAT
SS [terminator]
EXPLANATION
After execution of the SS command, a character set designated by the CS command is used for
printing. This is effective until an alternate character set is selected by the SA command or
[SO]CHR$(14), or by resetting the plotter with the DF or IN command.
In print mode, the standard character set can be selected by [SI]CHR$(15) This allows a text
composed of English and German to be printed using only a single LB command, eliminating the
need of dividing the LB command to execute the SS command. This command requires no
parameter. For its relation to the CS, CA and SA commands, refer to “ 3.6.2 Character Sets" in
Chapter 3.
EXAMPLE
10
' *** "SS" COMMAND ***
20 OPEN "LPT1:" AS #1
30 PRINT #1
"
IN; SP1 ;PA1000,1000;"
40 PRINT #1
"
CS1;"
50 PRINT
#
1,
"
SS;"
60 PRINT #1,
" LBtan({/3)=\3";
c h r
$( 3 )
70 PRINT #1,
" SP0;"
t a n (PI/ 3 )
= V
3
Fig. SS-1
TL
Tick Length
FORMAT
TL tick length in positive direction (,tick length in negative direction) [terminator]
TL [terminator]
PARAMETER RANGE
-1 2 8 .0 0 0 0 to + 127.9999(%)
DEFAULT VALUE
"TL 0.5,0.5;"
3-62