Rockwell Automation Publication 2080-UM002N-EN-E - November 2022
249
Chapter 12 Using microSD Cards
Configure Data Log
1. In the Connected Components Workbench software, go to the Properties pane to
configure your data log.
2. Select Data Log. Click Add Data Set to add a dataset. Note that each dataset will be
stored in the same file. You can add up to 10 datasets per configuration.
3. Click Add Variable to add variables to the dataset. You can add up to 128 variables to
each dataset.
For this quickstart sample project, add the following variables that you have previously
created to Dataset 1.
Create Data Log Ladder Program
1. Launch the Connected Components Workbench software. Create a user program for
your Micro800 controller.
2. Right-click Programs. Select Add New LD: Ladder Diagram. Name the Program (for
example, Prog1).
Local Variables
Variable Name
Data Type
data_bool
BOOL
data_int8
INT
data_string
STRING