Roche Cedex Bio Operator'S Manual Download Page 415

Page: 415 / 496

Roche Diagnostics

Operator’s Manual · Version 3.1

E-25

Cedex Bio System

13 ISE operation

Daily operation

Acoustic signal

An acoustic signal informs you of the fact that all tests are finished and the system
status has changed to

Standby

Validating sample results

ISE result handling is integrated in the operation of the main instrument. The process
of reviewing results is the same.

To validate sample results
1

Follow the instructions given in

Validating sample results

on page B-51.

For information on ISE flags, see

List of ISE flags

on page E-71.

System
Status

The

System Status

button displays both the icon and the color of one of the

buttons of the underlying

System Status

screen. (The icons are first priori-

tized by color, first priority being red, followed by yellow and green, and then
according to the sequence in which they are listed below.)

Analyzer (main cover)

Press the button and on the

Sys-

tem Status

screen check the text

about the status of the main cover.

Reagent cooler and cuvette ring
temperature

Press the button and on the

Sys-

tem Status

screen check the text

about the temperature.

Sample area ventilation

Press the button and on the System
Status screen check the text about
the ventilation status.

External fluid containers

Press the button and on the

Sys-

tem Status

press it again to display

the screen for handling the exter-
nal fluid containers.

Maintenance

Press the button and on the

Sys-

tem Status

press it again to display

the maintenance actions list.

Printer

Press the button and on the

Sys-

tem Status

screen check the text

about the printer status.

Icon

Meaning

Possible action

Summary of Contents for Cedex Bio

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Cedex Bio

Reviews:

Related manuals for Cedex Bio

Brands by name

Popular brands

Roche Cedex Bio, Operator'S Manual

Search results

Summary of Contents for Cedex Bio

Reviews:

Related manuals for Cedex Bio

Brands by name

Popular brands