Roche Cedex Bio, Operator'S Manual

Page: 237 / 496

Roche Diagnostics
Operator’s Manual · Version 3.1 B-107
Cedex Bio System 6 Special operations
Exporting data
cal_yyyymmddhhmmss.csv
Column Title Description
Instr Instrument ID (always 30 for Cedex Bio )
Msg Message Type:
7 Result for sample, control, or calibration
Index 151 Calibration data
152 Std-1 value
153 Std-2 value
154 Std-3 value
155 Std-4 value
156 Std-5 value
157 Std-6 value
App Application code
Date Date when the result was generated
Time Time when the result was calculated
SW-Version Software version installed on the instrument
Serial Serial number of the instrument
Cal/Std Calibrator ID (C.f.a.s. = 401) and standard number
User User name ( $SYS$ if Auto Accept is on)
Lot Lot number
LS/Value Calibration type/Target value of corresponding calibrator
L Lot calibration
S Set calibration
Unit Defined display unit
Flags Flag name
R0/Rate Offset and factor of the calibration curve
Kc/Raw01 Kc parameter value or absorbance value of cycle 1 in Abs.
A/Raw02 A parameter value or absorbance value of cycle 2 in Abs.
B/Raw03 B parameter value or absorbance value of cycle 3 in Abs.
C/Raw04 C parameter value or absorbance value of cycle 4 in Abs.
Raw05 - Raw40 Absorbance value of cycle 5 through 40 in Abs. (one cycle = 18 s)
Test Short name of the application
Table 34 Explanations on calibration results
If the calibration results were accepted using
Use Old
, "
???
" is displayed as the
Date
and
Time values, and the corresponding values for Raw1 - Raw40 are missing.