manualshive.com logo in svg

Ricoh SP 221SF, User Manual

Share
Download
Ricoh SP 221SF User Manual Download Page 184

Auto Continue

Item

Description

Value

Auto Continue Sets the machine to ignore an error

with paper size or type and continue
printing. The printing stops temporarily
when an error is detected, and restarts
automatically after about ten seconds
using the settings made on the control
panel.

• Off
• On

Default: [Off]

Toner Saving

Item

Description

Value

Toner Saving

Sets the machine to print using a
reduced amount of toner (for prints
made by the copier function only).

• Off
• On

Default: [Off]

Toner End Option Settings

This function is available for only SP 221SF, SP 277SFNwX, and SP 221SFNw.

Item

Description

Value

Toner End
Option
Settings

This setting is used to monitor the toner
level.

• Continue Printing

The machine no longer monitors
the toner level. Even when the
toner runs out, printing will
continue and no messages will
be displayed.

• Stop Printing

Monitoring the toner level is
enabled. The remaining toner
level can be checked in the
control panel and on Web
Image Monitor.

Default: [Stop Printing]

7. Configuring the Machine Using the Control Panel

182

Summary of Contents for SP 221SF

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands