Ricoh LD260c, Operating Instructions Manual, Page: 252 / 276

Duplex
• You can use the following copy paper with this function:
A3 , B4 JIS , A4 , B5 JIS , A5
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13
, 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K , 12 × 18 , 11 × 15 , 11 × 14 ,
10 × 15
• You cannot use the following copy paper with this function:
• Paper smaller than A5, 5
1
/
2
× 8
1
/
2
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Paper thicker than 163 g/m
2
, 43 lb.
• Paper thinner than 64 g/m
2
, 17 lb.
• Postcards
• When an odd number of originals are placed in the ADF, the back of the last page of copied
paper is blank.
• During copying, the image is shifted to allow for the binding margin.
Combine
• In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio
depends on copy paper sizes and the number of originals.
• The reproduction ratios selectable by the machine are 25-400%.
• If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available
range. However, with some ratios, parts of the image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the machine will
automatically rotate the image by 90° to make copies properly.
• If the number of originals placed is less than the number specified for combining, the last page
segment is left blank as shown.
BAS149S
7. Appendix
250
7