Ricoh LD260c, Operating Instructions Manual, Page: 105 / 276

3. Press [Program].
4. Press the program number you want to store.
5. Enter the program name with the letter keys on the display panel.
You can enter up to 34 characters.
6. Press [OK].
The screen returns to the program screen, showing the program number followed by the program
name. The screen returns to the initial copy display after a short time.
• Program numbers with against them already have settings made for them.
Changing a Stored Program
Changes program settings.
1. Check the program settings.
2. Specify the contents of a program.
3. Press the [Program] key.
4. Press [Program].
5. Press the program number you want to change.
Registering Frequently Used Functions
103
2