manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 129 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 129

4. Advanced Copying

This chapter describes the procedure for making copies in various modes.

Adjusting Copy Image Density

There are three types of adjustment available.

Auto image density

The machine automatically adjusts the image density by scanning the densities of originals. Dark
texture originals (such as newspaper or recycled paper) will be copied so that background will not
be reproduced.

Manual image density

You can adjust the density of the overall original in nine steps.

Combined auto and manual image density

Adjusts the density of an image only for dark texture originals.

Auto Image Density

The machine automatically adjusts the image density by scanning the densities of originals. Dark texture
originals (such as newspaper or recycled paper) will be copied so that background will not be reproduced.

1.

Make sure that [Auto Density] is selected.

If [Auto Density] is not selected, press [Auto Density].

Manual Image Density

You can adjust the density of the overall original in nine steps.

127

4

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments