manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 120 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 120

5.

Adjust the color tastes using [ ] or [ ].

6.

Press [OK] twice.

• The adjusted settings will be deleted and the initial values will be reset, when Auto Clear has been

performed, when the [Clear Modes] key has been pressed or when the power has been turned off.

• For explanations about and examples of what you can do with the color adjustment function, see

“What You Can Do with This Machine <Color Functions/Color Adjustments>”.

• p.3 "What You Can Do with This Machine <Color Functions/Color Adjustments>"

Image Adjustment

Adjusts image qualities.
The following five types of image adjustments are available:

Sharp/Soft

Adjusts the outline of an image.

Contrast

Adjusts the shades of an image.

Background Density

Adjusts the background density of an image.

Adjust U.C.R.

Adjusts the amount of black toner to express vividly the black areas in an image.

Text/Photo Sensitivity

Adjusts the standard level in judging the image in the text and photo part when using “Text / Photo”.

3. Color Copying

118

3

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments