manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 180 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 180

6.

Enter the length of [X1] with number keys, and then press [ ].

7.

Enter the length of [Y1] with the number keys, and then press [ ].

8.

Enter the length of [X2] with the number keys, and then press [ ].

9.

Enter the length of [Y2] with the number keys, and then press [ ].

10.

Press [OK] twice.

Double Copies

One original image is copied twice on one sheet.

BAS098S

• You cannot use the bypass tray with this function.
• Originals with a size of A5, B6 JIS, and 5

1

/

2

 × 8

1

/

2

 cannot be detected properly on the exposure

glass. Be sure to select the copy paper manually or place the originals in the ADF.

See the following table for original and copy paper sizes when using a 100 % ratio:

4. Advanced Copying

178

4

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments