Ricoh LD260c, Operating Instructions Manual, Page: 108 / 276

Registering the Initial Display's Default Functions
You can configure the settings of the initial screen so that the default display contain the functions you use
most often.
For example: if the default selection is the Duplex function, but the function you use most frequently is 1-
sided copying, you can change the default selection to 1-sided copying instead.
The settings you can program as defaults are Color Mode, Paper Tray, Original Type, Density, Special
Original, Original Orientation, Cover/Slip Sheet, Edit / Color, Dup./Combine/Series, Reduce / Enlarge,
Finishing, and the number of copies.
1. Specify scan settings and any other settings you require on the initial display.
2. Press the [Program] key.
BAT182S
3. Press [Program as Defaults].
2. Basic Copying
106
2