manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 116 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 116

Adjusting Color and Image Quality

This section describes how to adjust color balance and image quality. Also explains how to register user
colors.

Color Balance

Adjusts the overall color tone when the copy is reddish or bluish.

1.

Press [Edit / Color].

2.

Press [Color], and then press [Adjust Color].

3.

Press [Color Balance].

4.

Adjust the color balance by pressing [Lighter] or [Darker].

5.

Press [OK] twice.

• The adjusted settings will be deleted and the initial values will be reset, when Auto Clear has been

performed, when the [Clear Modes] key has been pressed or when the power has been turned off.

• For explanations about and examples of what you can do with the color adjustment function, see

“What You Can Do with This Machine <Color Functions/Color Adjustments>”.

3. Color Copying

114

3

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments