manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 95 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 95

Conserving supplies

95

Maintaining the MFP

Conserving supplies

Several settings in your application software or through the touch screen let you conserve toner and paper. For more 
information on changing these settings, see the 

Menus and Messages Guide

 on the 

Software and Documentation

CD.

Ordering supplies

To order supplies, contact the place where you bought the MFP for more information.

Ordering a print cartridge

When the  

88 Toner is low

 message appears or when you experience faded print, remove the toner cartridge. Firmly 

shake it side-to-side and front-to-back several times to redistribute the toner, then reinsert it and continue printing. Repeat 
this procedure multiple times until the print remains faded. When the print remains faded, replace the print cartridge.

Have a new cartridge available when the current one no longer prints satisfactorily.

For information about the print cartridges available for the MFP, contact the place where you bought the MFP.

Supply

Menu selection item

What the setting does

Toner

Toner Darkness, touch the menu 
button

Æ

 Printer Settings

Æ

 

Quality Menu

Lets you adjust the level of toner released on a sheet of print media. 
The values range from 1 (lightest setting) to 10 (darkest setting).

Note:

When toner is low, firmly shake the cartridge to redistribute 

any remaining toner. See 

Ordering a print cartridge

 for more 

information.

Print media

Multipage Print, touch the menu 
button

Æ

 Printer Settings

Æ

 

Finishing Menu

Causes the MFP to print two or more page images on one side of a 
sheet. Values for Multipage Print are 2 Up, 3 Up, 4 Up, 6 Up, 9 Up, 
12 Up, and 16 Up. Combined with the duplex setting, Multipage Print 
lets you print up to 32 pages on one sheet of paper (16 images on 
the front and 16 on the back).

Duplex, touch the menu button

Æ

 

Printer Settings

Æ

 Finishing Menu

Duplex printing is available when you have a duplex unit. It lets you 
print on both sides of a sheet of paper.

Use your software application or 
MFP driver to send a Verify Print 
job.

Lets you examine the first copy of a multiple-copy job to be sure it is 
satisfactory before you print the other copies. If the job is 
unsatisfactory, you can cancel the job.

See 

Printing and deleting held jobs

 for more information about a 

Verify Print job.

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments