manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 91 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 91

Installing an option card

91

Installing and removing options

Installing an option card

The MFP has one connector that supports the following option cards:

•

Internal print server

•

RS-232 Serial Interface Card

•

Parallel 1284-B Interface Card

•

Coax/Twinax Adapter for SCS

Warning:

Option cards are easily damaged by static electricity. Touch something metal such as the MFP frame 
before you touch an option card.

1

Locate the card connectors on the system board.

2

Remove the screw and the cover plate, and save them.

3

Unpack the card. Save the packaging materials.

4

Align the connection points on the card with the connector on the system board, and push the card firmly into the 
system board connector.

5

Insert the screw saved from the cover plate (or the extra screw shipped with the card).

6

Tighten the screw to secure the card.

3

Screw

Cover plate

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments