Ricoh InfoPrint 1570, User Manual, Page: 139 / 148

Notices
139
Notices
Notice to users of the New Zealand telephone network
The following are special conditions for the Facsimile User Instructions.
The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item
complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor
does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with
another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with
all of Telecom's network services.
This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.
This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.
Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment
associated with this device. The associated equipment shall be set to operate within the following limits for compliance to
Telecom's specifications:
• There shall be no more than 10 call attempts to the same number within any 30 minute period for any single
manual call initiation, and
• The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the
beginning of the next call attempt.
• The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not
less than 5 seconds between the end of one call attempt and the beginning of another.
South Africa telecommunications notice
This modem must be used in conjunction with an approved surge protection device when connected to the PSTN.
Using this product in Germany
This product requires a German billing tone filter to be installed on any line which receives metering pulses in Germany.
Metering pulses may or may not be present on analog lines in Germany. The subscriber may request that metering pulses
be placed on the line, or can have them removed by calling the German network provider. Normally, metering pulses are
not provided unless specifically requested by the subscriber at the time of installation.
Using this product in Switzerland
This product requires a Swiss billing tone filter to be installed on any line which receives metering pulses in Switzerland.
The filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.