manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 128 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 128

Solving paper feed problems

128

Troubleshooting

Solving paper feed problems

Symptom

Cause

Solution

Paper frequently jams. 

You are using paper that does not 
meet the MFP specifications.

Use recommended paper and other specialty media.

See 

Avoiding jams

 for information that can help prevent 

jams from occurring.

You have loaded too much paper 
or too many envelopes.

Make sure the stack of paper you load does not exceed 
the maximum stack height indicated in the tray or on the 
multipurpose feeder.

Guides in the selected tray are not 
set to the appropriate position for 
the size paper loaded.

Move the guides in the tray to the correct position.

The paper has absorbed moisture 
due to high humidity.

Load paper from a fresh package.

Store paper in its original wrapper until you load it.

See 

Storing print media

 for more information.

The pick rolls may be worn.

Replace the pick rolls.

See 

Ordering pick rollers

 for more information.

The

 Paper Jam 

message remains after 
you remove the jammed 
paper. 

You have not pressed 

Continue

 

or have not cleared the entire 
paper path.

Clear the entire paper path, and then press

 

Continue

.

See 

Clearing jams 

for more information.

The page that jammed 
does not reprint after you 
clear the jam. 

Jam Recovery in the Setup menu 
is set to Off.

Set 

Jam Recovery

 to Auto or On.

See the 

Menus and Messages Guide

 for more 

information.

Blank pages feed into 
the output bin. 

An incorrect media type is loaded 
in the tray being printed from.

Load the correct type media for your print job, or change 
the Paper Type to match the type of media loaded.

See the 

Menus and Messages Guide

 for more 

information.

Original documents 
misfeed in the ADF.

The guides are not adjusted 
properly.

Adjust the guides toward the media until they lightly rest 
against the edge of the media.

The pick roller mechanism may be 
worn.

Replace the roller mechanism.

See 

Ordering an ADF pick mechanism

 for more 

information.

Multiple pages feed into 
the ADF.

The separator roll may be worn.

Replace the separator roll.

See 

Ordering an ADF separator roller

 for more 

information.

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments