manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 89 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 89

Installing or removing a flash memory or firmware card

89

Installing and removing options

Installing or removing a flash memory or firmware card

Installation

Note:

Flash memory or firmware cards designed for other MFPs may not work with this MFP.

1

Remove the system board access cover. (See 

Accessing the MFP system board

.)

Note:

If an option card has been installed, you may need to remove the option card before installing the 
flash memory or firmware card.

2

Unpack the flash memory or firmware card.

3

Holding the flash memory or firmware card by the locking clips, align the plastic pins on the card with the holes on 
the system board.

4

Push the flash memory or firmware card firmly into place, and release the locking clips. 

The entire length of the connector on the flash memory or firmware card must touch the system board and be 
locked into the connector.

Be careful not to damage the connectors.

Connector

Flash memory or firmware card

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments