manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 87 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 87

Installing or removing a memory card

87

Installing and removing options

Installing or removing a memory card

Installation

Note:

MFP or printer memory cards designed for other printers or MFPs may not work with this MFP.

1

Remove the system board access cover. (See 

Accessing the MFP system board

.)

Warning:

MFP memory cards are easily damaged by static electricity. Touch something metal such as the MFP 
frame before you touch a memory card.

2

Push open the latches on both ends of the memory card connector.

3

Unpack the memory card. 

Avoid touching the connection points along the edge of the card. Save the packaging.

4

Align the notches on the bottom of the card with the notches on the connector.

5

Push the memory card firmly into the connector until the latches on either end of the connector 

snap

 into place.

It may require some force to fully seat the card.

6

Make sure each latch fits over the notch on the end of the card.

Memory connector

Memory card

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments