manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 81 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 81

Installing and removing options

81

9

Installing and removing options

Installing input options

Order of installation

Floor-mounted configurations require additional furniture. You must use either a printer stand or printer base if you are 
using a 2000-sheet drawer, a duplex unit and an input option, or more than one input option. If you purchased an MFP that 
scans, copies, and faxes, you may need additional furniture. Install the MFP and any options you have purchased in the 
following order:

CAUTION: 

If you are installing options after setting up the MFP, turn the MFP off, and unplug the power cord 

from the wall outlet before continuing.

•

MFP stand or MFP base

•

2000-sheet drawer

•

250-sheet or 500-sheet drawer

•

Duplex unit

•

MFP

CAUTION: 

The MFP requires three people to lift it safely.

For information on installing an MFP stand, MFP base, or 2000-sheet drawer, see the instructions included with the option.

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments