Ricoh InfoPrint 1570, User Manual, Page: 46 / 148

Fax setup
46
Faxing
4
Click Configuration .
If you are changing fax modes, you must click Submit before you can access the configuration page.
Note: During MFP power up, if the print server is configured to use Network Time Protocol (NTP) time, the
current date and time are provided. However, you must set the time zone to get the correct time.
5
Enter the required FCC information:
• Date and time (current date and time)
• Station name (personal name or company name)
• Station number (fax phone line number)
6
Select the Time Zone, such as Eastern (USA and Canada, Eastern Standard Time). This sets the required
information.
7
Set your options for Rings to Answer, and so on.
8
After you finish entering the information, click Submit .
Changing optional settings such as setting up a fax transmission log, creating permanent fax destinations, and enabling the
fax server function can be changed through your browser, or the MFP control.
Viewing a fax log
When you send or receive a fax, an entry of the activity is recorded in a file. You can view or print this file when you want.
To view the fax log:
1
Type the IP address of the MFP in the URL field of your browser, and then press Enter .
2
Click Reports .
3
Click Fax Settings .
4
Click F ax Job Log or Fax Call Log .