Loading the envelope feeder
69
Printing
Loading the envelope feeder
The optional envelope feeder can accept a variety of envelope sizes. However, the envelope feeder must be adjusted
correctly to ensure trouble-free printing. To load the envelope feeder:
1
Adjust the envelope support for the length of envelope you are loading.
•
Fully closed (pushed in toward the MFP) for short envelopes
•
Extended to the middle position for medium-length envelopes
•
Fully open (extended to its full length) for long envelopes
Warning:
Do not
place objects on the envelope feeder. Avoid pressing down on it or applying excessive force.
2
Lift the envelope weight back toward the MFP. It stays in place.
3
Slide the width guide to the far right.
4
Flex a stack of envelopes back and forth, and then straighten the edges on a level surface. Press down the
corners to flatten them.
Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly.
Summary of Contents for InfoPrint 1570
Page 1: ...InfoPrint 1570 MFP MT 4542 User s Guide S510 4976 00...
Page 146: ...146 Index V verify print 59 W weight paper 76 width guide 62...
Page 147: ......
Page 148: ...Printed in USA S510 4976 00...