manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 10 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 10

Configured models

10

Learning about the MFP

•

Copy and print documents at 600 dpi

Note:

Printed output is black and grayscale only, not color.

The flatbed (platen) can be used to scan or copy single pages or book pages. When using the flatbed:

•

Place the document in the left rear corner.

•

Scan or copy media up to 215.9 x 355.6 mm (8.5 x 14 in.).

•

Copy books up to 25.3 mm (1 in.) thick.

•

Copy and print documents at 600 dpi.

Configured models

The following illustrations show a standard MFP and an MFP with a duplex unit and a 500-sheet drawer. Other print media 
handling options are also available.

CAUTION:  

Floor-mounted configurations require additional furniture for stability. You must use either 

a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also 
must have a printer stand or printer base.

Standard output bin

Scanner

Duplex unit

Standard 

With duplex and drawer

Multipurpose feeder

Tray 1
(integrated tray or standard tray)

Tray 2
(500 sheets)

Control panel

Tray 1
(integrated tray or 
standard tray)

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments