manualshive.com logo in svg

Ricoh InfoPrint 1570, User Manual, Page: 134 / 148

Share
Download
Ricoh InfoPrint 1570 User Manual Download Page 134

Notices

134

Notices

Conventions

Note:

A 

note

 identifies something that could help you.

CAUTION: 

A 

caution

 identifies something that could cause you harm.

Warning:

A 

warning

 identifies something that could damage your product hardware or software.

Electronic emission notices

Federal Communications Commission (FCC) compliance information statement

Part 15

The Model 

I

 and Model 

II

 machine types 7002-101, 7002-102, 7002-111, 7002-112, 7002-001, 7002-011, 7002-012,  

7002-002, and machine types 4542-001, 4542-002, 4542-011, 4542-012, 4542-101, 4542-102, 4542-111, and 4542-112 
have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be 
required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended 
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void 
the user's authority to operate this equipment.

Note:

To assure compliance with FCC regulations on electromagnetic interference for a Class A computing 
device, use a properly shielded and grounded cable. Use of a substitute cable not properly shielded 
and grounded may result in a violation of FCC regulations.

Industry Canada compliance statement 

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations ICES-
003.

Avis de conformité aux normes de l’industrie du Canada 

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement ICES-003 sur le matériel brouilleur du 
Canada.

Summary of Contents for InfoPrint 1570





















































































































































Reviews:

No comments