Ricoh FAX7000L, Field Service Manual

Page: 161 / 377

G3 CCU Bit Switch 38
BIT FUNCTION DATA COMMENTS
Dialling method in pulse dial mode
0 Bit 1 Bit 0 Method P = Number of pulses sent out. N = Number dialled. Do not
0 0 Normal (P = N) change the factory settings.
1 0 1 Oslo (P = 10 - N)
1 0
Sweden (N + 1)
1 1 Not used
PSTN access method through PABX
2 Bit 3 Bit 2 Method Set these bits to match the type of signals accepted by the
0 0 No PABX PABX.
3
0 1 Access code (Loop Start)
1 0 Ground start
1 1 Flash start
4 Not used Do not change the factory setting.
5 Not used Do not change the factory setting.
6
Black line on the
0: Disabled
If this bit is 0, the black line for synchronization on the left side
image in Group 2 1: Enabled of the image will not be included.
mode
7 TSI inclusion in the 0: Disabled Do not change the factory setting.
NSS frame 1: Enabled
2-109