Ricoh FAX7000L, Field Service Manual, Page: 40 / 377

1-7-6. RTI #1 and RTI #2 - Function 84
The RTI (Remote Terminal Identification) identifies your terminal at the other end. It is displayed on the
operation panel at the other end during communication. RTI #1 will normally be used. However, when
you program a number as a Speed Dial or Quick Dial, you can select either RTI #1 or RTI #2 for use
when sending to that terminal. Note that if RTI #1 is selected, TTI #1 will also be used, and if RTI #2 is
selected, TTl #2 will be used.
Each RTI can have up to 20 characters.
1.
2.
3.
4.
5.
6.
7.
Make sure that the machine is in standby mode.
Press Function, then enter 80, then enter 2222.
Enter 84.
Type in RTI #1. For numbers use the ten-key pad. For letters and punctuation marks, use the Quick
Dial keys. For a space, use Quick Dial 27.
To correct a mistake, press Clear (erases the last letter or the cursor letter), or No (erases the entire
name).
Press Yes to store the displayed RTI.
Type in RTI #2 in the same way, then press Yes to store it.
Press Function to return the machine to standby mode.
1-30