Ricoh FAX7000L, Field Service Manual

Page: 123 / 377

SCU Bit Switch 18
BIT FUNCTION
DATA COMMENTS
0 Reception mode 0: Automatic This bit determines the default reception mode setting. The
1: Manual reception mode returns to this setting when power is switched
off/on. The bit is changed by user function 88.
1
Number of copies 0: One 1: As specified This feature allows the machine to print more than one copy
of received docu- by service function 03, of each received document.
ment mode 6
2 Communication 0: Disabled If this bit is set to 1, communication modes and the latest
parameter display 1: Enabled protocol signals are displayed on the operation panel LCD.
This is a useful aid for troubleshooting. However, this bit must
be kept at 0 during normal operation, or the user will not be
able to see the other end’s RTI on the display. An explanation
of the display follows below, starting with an example display.
TRANSMITTING G3N 72
STD A4 MR NFC
T: NSS R: CFR
FILE NO. 0165
PAGE: 1/1
Column 1 (Protocol Mode): G4 (Group 4), G3S (CClTT Group 3), G3N (Ricoh Group 3), or G2 (Group 2)
Column 2 (Modem Rate): 96 (9600 bps), 72 (7200 bps), 48 (4800 bps), 24 (2400 bps)
Column 3 (Resolution): 400 (400 x 400 dpi), 300 (300 x 300 dpi), 200 (200 x 200 dpi), 100 (200 x 100 dpi),
SDL (16 x 15.4 I/mm), DTL (8 x 7.7 I/mm), or STD (8 x 3.85 I/mm)
Column 4 (Document Width): A4 (up to 10. 1” wide), B4 (from 10. 1” to 11.7” wide), or A3 (wider than 11.7”)
Column 5 (Compression Type): MM (MMR), MR (MR), or MH (MH)
Column 6 (Others): ECM (ECM), NFC (New EFC - no fillbits), EFC (EFC - fillbits added)
2-71